Remote lock car 3.6 by Fastman92

With this mod you can:
IN CAR:
- open/close doors of your car
- turn on/off engine of car
- turn on/off lights of car
- turn on/off radio in car
- open bonnet/boot of car
- open/close specified door of car visually
OUT LAST CAR:
- control remotely your car and drive.
- open/close doors of your car
- turn on/off engine of car
- turn on/off lights of car
- enable/disable siren of emergency vehicle
- open bonnet/boot of car
- open/close specified door of car visually
- raise/lower a load of vehicles such as Dumper
- camera-on-car mode available

Fully compatible with GTA San Andreas v1.0 [US] HOODLUM No-CD Fixed EXE & GTA: San Andreas v1.01 [EURO] No-CD/Fixed EXE
- - - - - - - - - - - - - - - - -



 Keys for NUMPAD config
 In car:
L - turn on/off lights
O - open/close doors
Page up/down - turn on/off engine of car
X - turn on/off radio
[ or ] to open bonnet/boot of car
- or = AND ; or - to open/close to specify rear/front and left/right door to open visually.

 Out last car:
L - turn on/off lights
O - open/close doors
K - enable/disable siren, works for emergency vehicles
Page up/down - turn on/off engine of car
Press 4, 5, 6, 8 on numpad to drive. Doesn`t work for planes/helis.
- or + on numpad to raise/lower load of vehicles such as dumper, tractor, packer and so on.

[ or ] to open bonnet/boot of car
- or = AND ; or - to open/close to specify rear/front and left/right door to open.

Use - or = to select front or rear doors.
; or ' to select left or right door.
So for example if you want to open the right front door (on the driver side) press - and ; simultaneously.
You can hold down one key and press the other; it amounts to the same thing.

Type CAMERAONCAR to get camera-on-car view. Doesn`t work for planes/helis.
G, H, J, Y to drive a car in camera-on-car mode.
Type CAMERARESTORE to restore camera to player.
- - - - - - - - - - - - - - - - -

 Keys for LAPTOP (without numpad) config
As many laptops do not have numpads i released config for laptop users.
 In car:
L - turn on/off lights
O - open/close doors
Page up/down - turn on/off engine of car
X - turn on/off radio
[ or ] to open bonnet/boot of car
- or = AND ; or - to open/close to specify rear/front and left/right door to open visually.

 Out last car:
L - turn on/off lights
O - open/close doors
K - enable/disable siren, works for emergency vehicles
Page up/down - turn on/off engine of car
Press Y, H, G, J on keyboard to drive. Doesn`t work for planes/helis.
N or M on numpad to raise/lower load of vehicles such as dumper, tractor, packer and so on.

- or + on numpad to raise/lower load of vehicles such as dumper, tractor, packer and so on.

[ or ] to open bonnet/boot of car
- or = AND ; or - to open/close to specify rear/front and left/right door to open visually.

Use - or = to select front or rear doors.
; or ' to select left or right door.
So for example if you want to open the right front door (on the driver side) press - and ; simultaneously.
You can hold down one key and press the other; it amounts to the same thing.

Type CAMERAONCAR to get camera-on-car view. Doesn`t work for planes/helis.
G, H, J, Y to drive a car in camera-on-car mode.
Type CAMERARESTORE to restore camera to player.
- - - - - - - - - - - - - - - - -

 Installation
Make sure you are using one of the following gta_sa.exe versions:
	1.	GTA San Andreas v1.0 [US] HOODLUM No-CD Fixed EXE:
	EXE size: 14 383 616 bytes
	
	2.	GTA: San Andreas v1.01 [EURO] No-CD/Fixed EXE:
	EXE size: 15 806 464 bytes

Remote lock car is fully compatible with both of them, 1.0 US and 1.01 Euro No-CD shortly.
	
// It requires CLEO4 Library

 If you haven`t CLEO4 Library then download it from here: http://cleo.sannybuilder
Then:
- Add all required files to GTA San Andreas directory.
- By default RemoteLockCar.ini is configured to use numpad as set of keys.
So that if you don`t have numpad or would like to use laptop version:
- Open CLEO\RemoteLockCar.ini
You see named sections such as NUMPAD and LAPTOP, possible to have more.
To select what set (section in ini) of keys Remote lock car will use edit [MAIN] >> selected_keys
By default it is:
selected_keys = NUMPAD

It is not everything, if keys don`t match to you, you can edit existing set of keys (NUMPAD or LAPTOP) or add new one. Now it is no problem.


 Usage (after you installed mod)
Run the game.
Go to your favorite car. Read controls about remote control, lights, radio, doors, siren, bonnet, door components and engine.
After you exit car you can still control it. Read about proper keys for your installed version (numpad or laptop version).
Your last car doesn`t disappear until you to new one or car is wrecked.
- - - - - - - - - - - - - - - - -

 Changes since 3.5 version:
- Now Remote lock car is fully compatible both with:
	1. GTA San Andreas v1.0 [US] HOODLUM No-CD Fixed EXE
	2. GTA: San Andreas v1.01 [EURO] No-CD/Fixed EXE
- Turn_off_the_engine_after_player_exits_car option in .ini file didn`t work, because i forgot to write a code for this.
 Now it works.
- CAMERARESTORE now really works to restore camera view behind the player.

 Special thanks to:
seggaeman - for testing and friendship
Rockstar Games team who created so good game

 Informations:
Author: fastman92
Version: 3.6
For: GTA San Andreas
Email: [email protected]
Visit fastman92.tk